| dc.contributor.author |
Eraslan, AN |
|
| dc.contributor.author |
Arslan, E |
|
| dc.contributor.author |
Mack, W |
|
| dc.date.accessioned |
2022-10-19T11:24:46Z |
|
| dc.date.available |
2022-10-19T11:24:46Z |
|
| dc.date.issued |
2007 |
|
| dc.identifier.uri |
http://hdl.handle.net/11616/83061 |
|
| dc.description.abstract |
Based on Tresca's yield criterion and the flow rule associated with it, the distribution of stress, strain and displacement in a linearly strain hardening elastic-plastic hollow shaft subject to a positive radial temperature gradient and monotonously increasing angular speed is investigated. Presupposing circular symmetry and plane strain conditions, the problem is accessible to an analytical treatment. It is found that - depending on the temperature difference between the outer and the inner surface - qualitatively different types of solutions may occur, and that such a temperature difference on the one hand reduces the elastic limit angular speed but on the other hand may increase the fully plastic angular speed slightly. The residual stresses after stand-still and subsequent cooling are depicted, too. |
|
| dc.description.abstract |
C1 Vienna Univ Technol, Inst Mech & Mechatron, A-1040 Vienna, Austria. |
|
| dc.description.abstract |
Inonu Univ, Dept Mech Engn, TR-44280 Malatya, Turkey. |
|
| dc.description.abstract |
Middle E Tech Univ, Dept Engn Sci, TR-06531 Ankara, Turkey. |
|
| dc.source |
ACTA MECHANICA |
|
| dc.title |
The strain hardening rotating hollow shaft subject to a positive |
|
| dc.title |
temperature gradient |
|